Product Center

Control Cable

This product is suitable for control, monitoring circuit and protection circuit with AC rated voltage of 450/750V and below. Its mechanical and physical properties. Electrical performance meets the requirements of GB/T9330.2- -2008 "plastic insulation control cable"

Key Words：

control cable outer diameter

Category ：

Control Cable

Tel ：

+86-400-891-6689

Back To List

Online Message

Control Cable

Use characteristics and main electrical performance indicators

1. The laying temperature of the cable is ≥ 0 °C;
2. The long-term allowable operating temperature of the cable conductor is 70 ° C;
3. Minimum allowable bending radius;
a. Untwisted cable shall be not less than 6 times the outer diameter of the cable.
b: Cables with armor or copper tape shielding structure shall be not less than 12 times the outer diameter of the cable.
c: The flexible cable with shielding structure should be no less than 6 times the outer diameter of the cable.
4. The finished cable can withstand AC 50Hz, 3000V, 5min withstand voltage test without breakdown.
5. The conductor DC resistance complies with the GB/T3956-2008 "Conductors for Cables" standard.

This product is used for 0.6/1KV and below control, monitoring circuit and protection circuit. Its mechanical and physical properties and electrical performance are in accordance with GB/T9330.3-2008 "Plastic insulation control cable part 3 XLPE insulated control cable" standard .

Use characteristics and main electrical performance indicators

1. Cable laying temperature ≥ 0 ° C:
2. The long-term allowable operating temperature of the cable conductor is 90 °C:
3. Minimum allowable bending radius:
a. The armored cable shall be not less than 8 times the outer diameter of the cable.
b. Cable with armor or copper tape shielding structure. It should be no less than 12 times the outer diameter of the cable.
c. The flexible cable with shielding structure should be no less than 6 times the outer diameter of the cable.
4. The finished cable can withstand AC 50Hz.3. 5KV.5min withstand voltage test without breakdown.
5. Conductor DC resistance is in accordance with GB/T3956--2008 "Conductor for Cable" standard.

Online Message